Aerial
Tanaka Gas Powered Reversible Drill
Tanaka Gas Powered Reversible Drill Tanaka Gas Powered Reversible Drill, This drill is great for a lineman for drilling holes in the poles for poleline hardware. With a 27 cc, 1.4 h.p. PureFire two-stroke engine The work for linemen is reduced, a must have on a bucket truck.
Drill 3/8" Milwaukee 024020
 Drill 3/8 Milwaukee 024020 With a powerful 8.0 Amp motor and 0-2,800 RPM, the 3/8" Drill has the power to perform even the toughest applications. Durability standard with an all metal gear case that protects the gears and provides superior support in high torque applications.
Magnum Drill 1/2" Milwaukee 029920
 Magnum Drill 1/2 Milwaukee 029920 This powerful Milwaukee 8.0 amp 1/2 in. drill has the construction and performance to eliminate any other 1/2 in. drill in its category.
Magnum Drill 3/8" Milwaukee 020120
Magnum Drill 3/8 Milwaukee 020120 With a powerful 7.0 amp motor this 3/8 in. drill can perform at the higher speed of 0-2500. Drilling, surface finishing and other maintenance tasks go quickly with the extra speed.
Milwaukee 1/2 in. Dual Speed Hammer-Drill
Milwaukee 1/2 in. Dual Speed Hammer-Drill At 8.5 amps this heavy duty pistol grip Hammer-Drill can handle the toughest drilling of 3/4 inch holes in concrete. With dual range speed control, the operator can choose more power to speed for the toughest applications or more speed and less torque for lighter applications.
Corded 5/8" Hex Drive Impact Wrench MIL 9096-20
Corded 5/8 Hex Drive Impact Wrench MIL 9096-20 It has a Milwaukee built motor coupled with a large ram and anvil which produce up to 315 ft. lbs. of torque! This impact wrench can achieve tasks only larger impact wrenches could do in the past. Fastening applications, driving large lag bolts deep into wood, and drilling large holes in utility poles can easily be accomplished with the 9096 impact wrenchMIL 9096-20.
M18 Cordless 1/2" Hammer-Drill Milwaukee 260222
M18 Cordless 1/2 Hammer-Drill Milwaukee 260222 Built with a Milwaukee® 4-Pole Frameless Motor, this M18TM cordless lithium-ion ½” hammer drill/driver delivers best-in-class 525 in-lbs of peak torque with the XC High Capacity REDLITHIUM™ battery. A variable-speed trigger provides speed control between 0-1,700 RPM on high speed and 0-550 RPM on low, with 0-29,000 BPM.

Order

Contact Us

California Office
1-800-256-5186
Georgia Office
1-888-800-1712




Lasher Repairs

A-Aerial specializes in cable lasher repairs and servicing. Two day emergency service is available. We also accept you’re dropped or damaged lasher as a trade-in toward a new unit. When sending lashers to us for repair, please include contact information and description of requested repair.

C lasher rebuild cost usually range from $1600.00 to $2400.00.

J2 lasher rebuild cost usually range from $1,800 to $2,600.

Refurbished Lashers

We sell used and refurbished cable lashers. All used and refurbished lashers have a 90 day warranty.

Used C lashers from $2,195

Refurbished C lashers from $2,595

Refurbished J2 Lashers from 3,450.00

Refurbished J2B (Modified with no strand lock.) Lashers from 3,250.00