Aerial
Type 302 Lashing Wire
Type 302 Lashing Wire Type 302 Lashing wire for Cable lashers.
Guy Wire - Strand
Guy Wire - Strand One end of the cable is attached to the structure, and the other is anchored to the ground at a distance from the structure's base. The tension in the diagonal guy-wire, combined with the compressional strength of the structure, allows the structure to withstand lateral loads such as wind or weight of the structure.
Guy Hook 4 1/2" For 5/8 Hardware
Guy Hook 4 1/2 For 5/8 4 1/2" length for use with 5/8" hardware. They provide an efficent and economical attachment for down guys.
Guy Hook 5 1/2in For 3/4 Hardware
Guy Hook 5 1/2in For 3/4 Hardware Guy Hook H P133AX. 5 1/2" length for use with 3/4" hardware. They provide an efficient and economical means of fastening guys to poles.
Insulator, Guy Strain H L502
Insulator, Guy Strain H L502 Hight 3 1/2" , Width 2 1/2", Max Cable Size: 3/8". Porcelain Guy Strain Insulator, use preforms to attach to stand to make down guy non-conductive.
Insulator, Guy Strain H L504
Insulator, Guy Strain H L504 Hight 4 1/2" , Width 2 7/8", Max Cable Size: 1/2". Porcelain Guy Strain Insulator, use preforms to attach to stand to make down guy non-conductive.
Pole Step
Pole Step The Pole Step has rolled fetter drive threads and a wide, flat driving surface make installation fast and easy. A knurled ring indicates the proper driving depth.
Crossoverclamp
Crossoverclamp These crossover clamps are used to clamp 2 messengers where they cross at right angles.
Cable Suspension Clamp Angle H J7901
Suspension Clamp Angle Cable Suspension Clamps have curved ends to prevent damage to the messenger strand when turning small angles. All clamps firmly grip 1/4 to 7/16-inch diameter strand.
Cable Suspension Clamp - Angle H J7901A
Cable Suspension Clamp Angle Cable Suspension Clamps have curved ends to prevent damage to the messenger strand when turning small angles. All clamps firmly grip 1/4 to 7/16-inch diameter strand.
3 Bolt Clamp 4 inch 4" w/ 1/2" bolts
3 Bolt Clamp 4 inch 4 3 Bolt Clamp 4 inch 4" w/ 1/2" bolts, Also called a guy clamp is used with a deadend to secure a down guy.
3 Bolt Clamp 6" w/ 1/2" bolts H J930
3 Bolt Clamp 6 w/ 1/2 bolts H J930 Guy 3 bolt 6" clamps are rolled from carbon steel with straight parallel grooves that will not damage guy strand. The clamping bolts have special shoulders to prevent turning when the nuts are tightened.
Bonding Clamp
Bonding Clamp The fully cadmium plated Bronze Bonding Clamp assembly consists of two clamp sections and a 5/16 x 7/8-inch bronze hex washer head bolt.
D Cable Lashing Clamp
D Cable Lashing Clamp Used in aerial construction to secure terminating lashing wire or ground wire to a strand Attaches to 1/4"(6mm) to 7/16" (16mm)
Coppercoated Staples
Copper Staples Coppercoated staples are used to secure ground wire and ground wire molding to wood poles. 1-1/4" x 1/4" x .114"
No Wrench Screw Anchor 3/4" X 66" H - 6526WCA
No Wrench Screw Anchor 3/4 X 66 Used for guying wires at utility poles. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment.
No-Wrench Screw Anchor 1" X 66" H - J6528WCA
No-Wrench Screw Anchor 1 X 66 Used for guying wires at utility poles. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment.
No-Wrench Screw Anchor 1 1/4" X 66"
No-Wrench Screw Anchor 1 1/4 Used for guying wires at utility poles. Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment.

Order

Contact Us

California Office
1-800-256-5186
Georgia Office
1-888-800-1712




Lasher Repairs

A-Aerial specializes in cable lasher repairs and servicing. Two day emergency service is available. We also accept you’re dropped or damaged lasher as a trade-in toward a new unit. When sending lashers to us for repair, please include contact information and description of requested repair.

C lasher rebuild cost usually range from $1600.00 to $2400.00.

J2 lasher rebuild cost usually range from $1,800 to $2,600.

Refurbished Lashers

We sell used and refurbished cable lashers. All used and refurbished lashers have a 90 day warranty.

Used C lashers from $2,195

Refurbished C lashers from $2,595

Refurbished J2 Lashers from 3,450.00

Refurbished J2B (Modified with no strand lock.) Lashers from 3,250.00