Aerial
Cablematic Jacket Stripping Tools
Cablematic Jacket Stripping Tools Fast and Efficient removal of jackets from trunk and distribution coaxial cables. Preset JST blade assures there is no scoring or nicking of the aluminum sheath. Knurled body for sure grip.
Ripley CST 500 Combination Tool
Ripley CST 500 Combination Tool Combination coring tool strips in one fast and precise operation. Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit.
Ripley 500T Quick Change All-In-One Coring & Stripping Tool
Change Coring Stripping Tools Quick Change Coring / Stripping Tool accurately strips the jacket, cores the dielectric, strips and bevels the aluminum sheath. Conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool using a “QUICK-CHANGE” rotating body ring.
CFS2 Fiber Optic Stripper
CFS2 Fiber Optic Stripper For stripping 250 micron buffer coating to expose 125 micron cladded fiber Second hole for stripping 2-3mm fiber jackets 140 µm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber Pre-set at the factory - no adjustments needed Will not scratch or nick glass fiber All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips Comfort-grip, ergonomic handles Lock to hold tool closed when it is not in use.
AJST Armored Jacket Stripping Tool
AJST Armored Jacket Stripping Tool RED RIP AJST 500/P3 AJST is designed to remove the outer jacket and armor layer on CommScope P3 JACASS and QR JACASS underground construction trunk and distribution cable. Factory preset blade with no adjustment required. Unique design has a common handle and interchangeable stripping heads for a range of cable sizes. Rugged, color coded anodized aluminum design (same as other Cablematic tools) for easy identification and long life
Trilogy Coring & StrippingTool
Trilogy Coring & StrippingTool Manual or drill operation; CST tools have a standard "T" handle with a built-in 3/8 inch (9.5 mm) drill adapter Double helix coring bit designed for fast and precise coring and stripping of polyethylene disc/air dielectric cable Heat treated, sheath cutting blade produces a smooth, beveled edge and can be replaced without the expense of replacing the entire coring bit Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping.
Flexible Feeder Stripping Tool
Flexible Feeder Stripping Tool For Times Fiber Communications (TFC) “Flexible Feeder” (TX10-15 Low Loss Drop Feeder) Cable. Color coded and labeled for ease of proper tool identification Green - TXFF for Standard cable construction Blue – TXFF-Q for Quad Shield cable construction The first cut will prepare cable to proper center conductor length. The second cut will remove the proper length of outer jacket exposing the braid.

Order

Contact Us

California Office
1-800-256-5186
Georgia Office
1-888-800-1712




Lasher Repairs

A-Aerial specializes in cable lasher repairs and servicing. Two day emergency service is available. We also accept you’re dropped or damaged lasher as a trade-in toward a new unit. When sending lashers to us for repair, please include contact information and description of requested repair.

C lasher rebuild cost usually range from $1600.00 to $2400.00.

J2 lasher rebuild cost usually range from $1,800 to $2,600.

Refurbished Lashers

We sell used and refurbished cable lashers. All used and refurbished lashers have a 90 day warranty.

Used C lashers from $2,195

Refurbished C lashers from $2,595

Refurbished J2 Lashers from 3,450.00

Refurbished J2B (Modified with no strand lock.) Lashers from 3,250.00